Medidor a Turbina
 
 
 
 
 
 
 
 
 

// Medidor a Turbina - InserciÓn - F-1100 Series

F-1100 Series
Turbine Flow Meters are suitable for pipe sizes ranging from 1¼ to 72 inches (1 inch for copper). The single turbine flow meters are ideal for smaller pipes, and for larger pipes with enough straight pipe to provide fully conditioned flow.

Standard Features

Highly Accurate


NIST traceable factory calibration performed on every meter, within ±0.5% of reading accuracy at the calibrated (typical) flow velocity and within ± 1 - 2% of reading over a 50:1 flow range. ONICON'S vs. performance is unmatched.

Unequaled Operating Range

Provides repeatable flow data over a 175:1 turndown from 0.17 to 30 ft/s.


Excellent Long-Term Reliability

Patented non-magnetic impedance sensing method, low mass non-metallic turbines with sapphire jewel bearings and tungsten carbide shafts provide a mechanical system that virtually does not wear.

Simplified Hot Tap Insertion Design

Integral HOT-TAP design is standard for all insertion meters and allows installation and removal without system shutdown. Meters can be removed and reinserted by hand without special tools.

Integral Conditioned Outputs

Electronics enclosure includes integral conditioned output circuitry for ease of installation. Analog output models include both 4-20 mA and 0-10 VDC signals. Isolated-analog, dry contact switch and frequency outputs are also available.

Typical Applications

ONICON F-1100 Series insertion type flow meters are designed to work in pipe sizes ranging from 1¼" (1" for copper) to 72" in diameter. The F-1100 series flow meters deliver highly accurate flow data when used in applications with a straight pipe run along enough to establish a fully developed flow profile. Typical uses for the F-1100 series meters include: chilled water, hot water, condenser water, domestic water, process cooling, steam condensate and brine.

 

F-1100 Series Product Selection Guide

 Model
Number

 Description

 F – 1100

 Single turbine insertion flow meter with frequency output provides a high – resolution frequency output for connection to a Display or BTU Meter.

F – 1110

Single turbine insertion flow meter with analog output provides 4-20 mA & 0-10 V analog outputs.

 F – 1111

Single turbine insertion flow meter with isolated analog output provides isolated 4-20 mA & 0-10 V analog outputs.

 F – 1120

Single turbine insertion flow meter with frequency output provides a conditioned binary/ digital output signal corresponding to flow rate.

F – 1130

Single turbine insertion flow meter with scaled output provides a scaled binary/ digital output for flow totalization.

 D – 1200
Series

Display Module Series for F – 1100 Series Flow Meters

 
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 
Av. Rivadavia 11088 P.6° Dto.”B” (C1408AAX) Capital Federal - Argentina
Tel. /Fax (+54) 011 4644-0825 / 4644-1376